Ultra-thin, large-hole rotary hydraulic cylinder with a total length of only two-thirds that of the original type.

During installation, secure it using the rear locking mechanism.

Ultra-thin, large-hole rotary hydraulic cylinder with a total length of only two-thirds that of the original type.

Built-in non-return valve self-locking mechanism.

During installation, secure it using the rear locking mechanism.

Ultra-thin, large-hole rotary hydraulic cylinder with a total length of only two-thirds that of the original type.

Built-in non-return valve self-locking mechanism.

During installation, secure it using the rear locking mechanism.

Maximum pressure: 40 bar

Modular design – to achieve different piston strokes

The central hole – used for conveying air, cooling fluid, or oil

The stroke can be controlled through proximity switch or LPS

With a lightweight, large-bore rotary oil cylinder and an open through-hole design, it can be used to machine long-shaft components.

With high speed and long service life, its interior parts and components are originally imported.

Fully sealed self-contained scrap iron shield

Internal centralized lubrication: lubrication interval is 2 to 5 minutes

Lubricating pressure range: 10–45 bar

Lubricating oil: HLP 46 DIN51502

The crank-type two-claw synchronous clamp can achieve a long claw stroke.

The folding surfaces are hardened and precisely ground, and are directly lubricated.

The clamping precision is high and the pressure resistant efficiency is very high.

This product is applicable to valve and special-shaped parts.

High positioning precision, long service life.

The clamping is convenient and quick, safe and reliable.

Plate stroke can be customized according to the requirements of workpieces.

Workpiece positioning is convenient and the changeability is high.

Patented product, cylindrical form of connection.

Front-mounted hollow precision collet, with repeated positioning accuracy of up to 0.01mm.

Concealed cylinder, high-speed operation, no additional clamping power unit required.

An axial positioning device can be installed to improve the axial accuracy and processing efficiency of workpieces.

Suitable for CNC lathes, vertical and horizontal machining centers, fourth-axis machines, and other automation equipment, enabling automated feed-clamping operations.

Chuck will not shrink and can control the positioning length of the workpiece.

When pressure is interrupted, the chuck remains clamped.

Front-mounted hollow collet chuck with an internally mounted cylinder; no need to match it with a power cylinder.

The clamping precision is 0.05–0.08 mm, measured 10 mm from the chuck end.

Applicable to CNC lathes, conventional lathes, and other automated equipment, it enables automatic feeding and clamping during machining.

Aluminum alloy cylinder body, lightweight, excellent heat dissipation.

Patented product, cylindrical form of connection.

This product features a front-mounted, built-in design for easy installation and adheres to industry-standard connection methods. It is safe, reliable, and boasts a long service life, with high clamping precision, fast operation, and the ability to handle high speeds—all without requiring a power cylinder.

Suitable for batch processing and precision machining of plate and short-shaft parts.

Repeatability of positioning accuracy up to 0.01 mm.

Front-mounted power supply design, easy installation, need not to match back cylinder.

Depending on the specifications, a super quantity expansion of 0.5 to 1.5 can be achieved.

A short cylindrical connection method that conforms to industry standards and is widely used.

The front end is equipped with an axially mounted threaded hole for convenient positioning.

Dual-direction taper locking; repeated positioning accuracy can reach 0.01 mm.

Patented product, cylindrical form of connection.

Easy installation, and the connection method follows industry standards, with no change in the machine structure; similar to the connection method of general mechanical chuck, the specific installation method refers to installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can clamp siphon, three-way, oval and other special-shaped

Applicable to all kinds of CNC lathes

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure is outlined in the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing disc, short-shaft, gear parts and large bulk of products.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure should follow the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing square parts and other special-shaped parts.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure should follow the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing square parts and other special-shaped parts.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easily installed, and the connection method of its spindle follows industry standards; it is simply equipped with a flange consistent with the chuck, without changes in the machine structure.

The specific installation method for the chuck refers to the installation instructions

The chuck is a built-in cylinder, and it is stepped up and released through the air pressure control mechanism at the spindle rear.

The chuck center is a half-through-hole design, making the chuck suitable for machining long-shaft parts.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

Patented product, vertical with base plate.

The chuck is a built-in cylinder that is easy to install, requiring no additional power source; air enters from the side to achieve clamping and releasing. Multiple chucks can be installed in a workspace simultaneously to enable multi-station machining, thereby improving production efficiency.

The chuck is suitable for drilling and tapping machines, milling machines, vertical lathes and machining centers.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

ZL 2020 103763185

Patented product, vertical with base plate

The chuck is a built-in cylinder that is easy to install, requiring no additional power source; air enters from the side to achieve clamping and releasing. Multiple chucks can be installed in a workspace simultaneously to enable multi-station machining, thereby improving production efficiency.

The chuck is suitable for drilling and tapping machines, milling machines, vertical lathes and machining centers.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

ZL 2020 103754909

The wedge-shaped through-hole chuck complies with Japanese and Taiwanese standards.

All sliding surfaces undergo hardening treatment and precision grinding.

High rigidity structure and high clamping accuracy.