Patented product, cylindrical form of connection.

Easy installation, and the connection method follows industry standards, with no change in the machine structure; similar to the connection method of general mechanical chuck, the specific installation method refers to installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can clamp siphon, three-way, oval and other special-shaped

Applicable to all kinds of CNC lathes

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure is outlined in the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing disc, short-shaft, gear parts and large bulk of products.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure should follow the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing square parts and other special-shaped parts.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easy to install, and its connection method complies with industry standards; it is simply fitted with a flange that matches the chuck, without requiring any modifications to the machine structure. Similar to the connection method used for standard mechanical chucks, the specific installation procedure should follow the installation instructions.

The chuck is a built-in cylinder with large clamping force, good sealing, high precision, safety and reliability, nice economical and practical applicability and long service life, and it can be suitable for processing square parts and other special-shaped parts.

ZL 2020 103763185

Patented product, cylindrical form of connection.

The chuck is easily installed, and the connection method of its spindle follows industry standards; it is simply equipped with a flange consistent with the chuck, without changes in the machine structure.

The specific installation method for the chuck refers to the installation instructions

The chuck is a built-in cylinder, and it is stepped up and released through the air pressure control mechanism at the spindle rear.

The chuck center is a half-through-hole design, making the chuck suitable for machining long-shaft parts.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

Patented product, vertical with base plate.

The chuck is a built-in cylinder that is easy to install, requiring no additional power source; air enters from the side to achieve clamping and releasing. Multiple chucks can be installed in a workspace simultaneously to enable multi-station machining, thereby improving production efficiency.

The chuck is suitable for drilling and tapping machines, milling machines, vertical lathes and machining centers.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

ZL 2020 103763185

Patented product, vertical with base plate

The chuck is a built-in cylinder that is easy to install, requiring no additional power source; air enters from the side to achieve clamping and releasing. Multiple chucks can be installed in a workspace simultaneously to enable multi-station machining, thereby improving production efficiency.

The chuck is suitable for drilling and tapping machines, milling machines, vertical lathes and machining centers.

We can supply the patterns of two-jaw, four-jaw, five-jaw, etc.

ZL 2020 103754909

Short cylinder rear-lock screw connection form

The chuck is easy to install, with a connection method that adheres to industry standards, eliminating the need to modify the original machine tool structure. The cylinder and chuck are integrated in design, allowing a single chuck to be mounted both at the front and rear of the machine tool for simultaneous use.

The chuck features a large bore diameter, incorporates a one-way valve, and provides reliable clamping; moreover, when the chuck is rotating, the sealing device is disengaged, thereby ensuring a long service life.

Working principle: the clamping power source of the chuck is compressed air; when compressed air flows into the one-way valve through a distributing ring and then into the chuck cylinder, thus to drive the piston, so that the jaw clips a workpiece tightly; then, the reversing valve is powered off, and the air pressure within the cylinder is sealed by the one-way valve. The sealing device of the distributing ring is released, not to contact the chuck body, and the equipment can be started for normal work at this time.

Note: Since the chuck is ventilated in both the clamping and releasing states, and the special sealing element on the distribution ring tightly clamps the outer circumference of the chuck body, the machine tool spindle must be stopped while the chuck is clamping or releasing the workpiece.

With two functions of clamping and holding.

When a front-locking connection form is required, contact us before ordering.

ZL 2015 10398341.3

Short cylinder front-lock screw connection form

The chuck is easy to install, with a connection method that complies with industry standards, eliminating the need to modify the original machine tool structure; the cylinder and chuck are integrally designed, allowing a single chuck to be mounted on both the front and rear sides of machine tools for simultaneous use.

The chuck features a large bore diameter, incorporates a one-way valve, and provides reliable clamping; moreover, when the chuck is rotating, the sealing device is disengaged, thereby ensuring a long service life.

Working principle: the clamping power source of the chuck is compressed air; when compressed air flows into the one-way valve through a distributing ring and then into the chuck cylinder, thus to drive the piston, so that the jaw clips a workpiece tightly; then, the reversing valve is powered off, and the air pressure within the cylinder is sealed by the one-way valve. The sealing device of the distributing ring is released, not to contact the chuck body, and the equipment can be started for normal work at this time.

Note: Because the chuck is ventilated in the clamping and released state, and the special sealing element on the distributing ring clamps the excircle of the chuck body tightly, so the machine tool spindle should stop rotating while the chuck is clamping and releasing the workpiece.

ZL 2015 10398341.3